6 Cylinder
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
5000 2.2 | 43 | 04/1977 - 07/1980 | WD |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
323 i | E 21 | 01/1978 - 09/1982 | 23 6E A |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
911 3.0 SC | POR 15 | 07/1977 - 06/1979 | 930.03/13 | |
911 3.0 SC | POR 13 | 09/1977 - 07/1979 | 930.04/05 | |
911 3.0 SC | POR 192 | 09/1977 - 07/1979 | 930.06 | |
911 3.0 SC Coupe/Targa | POR 141 | 07/1979 - 07/1980 | 930... |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
5000 2.2 | 43 | 08/1978 - 07/1980 | WE |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.2 5E | 43, 80, C2 | 08/1980 - 07/1982 | WE | |
100 2.2 5E Avant | 43, 80, C2 | 08/1979 - 07/1981 | WE | |
4000 2.2 5E | 81 | 08/1980 - 07/1984 | WE | |
5000 2.2 | 43 | 04/1977 - 05/1983 | WD | |
80 2.2 | 81, 85, B2 | 10/1980 - 08/1983 | WE | |
Model | Type | Years | Engine | |
Passat 2.2 | 32B | 01/1981 - 07/1983 | WE | |
Passat 2.2 Variant | 32B | 01/1981 - 07/1983 | WE | |
Santana 2.2 | 32 | 08/1982 - 07/1983 | WE |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.2 5E | 43, 80, C2 | 08/1980 - 07/1982 | WE | |
4000 2.2 5E | 81 | 01/1980 - 11/1983 | WE | |
5000 2.2 | 43 | 08/1978 - 05/1983 | WE | |
Model | RB Key | Years | Engine | |
Quantum 2.2 | VWW 195 | 09/1982 - 08/1984 | WE | |
Quantum 2.2 Coupe | VWW 3789 | 09/1982 - 08/1983 | WE | |
Quantum 2.2 Station Wagon | VWW 3788 | 09/1982 - 08/1984 | WE |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
200 2.2 | 43, C2 | 10/1979 - 09/1982 | WC | |
200 5E 2.2 i | C2 | 04/1978 - 12/1983 | WC |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
200 2.2 Turbo | 43, C2 | 10/1979 - 09/1982 | WK | |
5000 2.2 Turbo | 43 | 09/1979 - 07/1982 | WK |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
200 2.2 Turbo | 43, C2 | 10/1979 - 09/1982 | WJ | |
200 2.2 Turbo | 43, C2 | 08/1980 - 12/1981 | WS | |
200 2.2 Turbo | 43, C2 | 08/1981 - 09/1982 | KJ |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB Key | Years | Engine | |
260 2.8i | VOL 193 | 07/1979 - 07/1982 | B28F Kat. |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
911 3.0 SC | POR 14 | 08/1979 - 08/1983 | 930.16/17 | |
911 3.0 SC | POR 191 | 09/1979 - 07/1980 | 930.07/08 |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
Capri II 2.8i | 78 | 01/1981 - 04/1987 | RRN | |
Granada II 2.8i | 78, 82 | 08/1977 - 04/1985 | PR... | |
Granada II 2.8i | 78, 82 | 08/1977 - 07/1981 | PRB | |
Granada II 2.8i Turnier | 78, 82 | 08/1977 - 04/1985 | PR... |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB Key | Years | Engine | |
25 2.7i | REN 809 | 01/1984 - 08/1989 | Z7V 708 | |
25 2.7i | REN 821 | 01/1984 - 08/1989 | Z7V 709 | |
25 2.7i | REN 822 | 01/1984 - 08/1989 | Z7V 711 | |
30 2.7i | REN 231 | 10/1978 - 12/1983 | PRV 140 |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB Key | Years | Engine | |
911 3.0 SC | POR 16 | 07/1980 - 07/1983 | 930.10 |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
Quattro 2.2 Turbo | 85, B2 | 07/1980 - 07/1987 | GV, WR |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB Key | Years | Engine | |
760 2.8i | VOL 203 | 08/1982 - 04/1986 | B28F Kat. |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
520i | E 28 | 06/1981 - 09/1982 | 20 6E A |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB Key | Years | Engine | |
DMC-12 | DLO 1 | 10/1980 - 10/1982 | PRV |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
5000 2.2 Turbo quattro | 44 | 01/1985 - 02/1988 | MC | |
Quattro 2.2 turbo | 85, B2 | 03/1982 - 07/1989 | WX |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.2 | 44, 44Q, C3 | 08/1982 - 07/1984 | WC | |
100 2.2 Avant | 44, 44Q, C3 | 05/1983 - 07/1984 | WC | |
100 2.2 Avant quattro | 44, 44Q, C3 | 08/1984 - 12/1987 | HX | |
100 2.2 Quattro | 44, 44Q, C3 | 08/1984 - 12/1987 | HX | |
100 2.2 Quattro | 44, 44Q, C3 | 08/1984 - 11/1990 | KU | |
500 E 2.2 | C3 | 11/1983 - 01/1992 | WC | |
80 2.0 | 81, 85, B2 | 08/1983 - 07/1984 | HP, JS | |
80 2.0 Quattro | 81, 85, B2 | 08/1982 - 07/1984 | KK, JS | |
90 2.0 | 81, 85, B2 | 10/1984 - 03/1987 | HP, JS | |
90 2.2 | 81, 85, B2 | 10/1984 - 03/1987 | KV, HY | |
90 2.2 Quattro | 81, 85, B2 | 03/1984 - 03/1987 | HY | |
Coupe 2.0 GT | 85, B2 | 08/1983 - 07/1986 | HP | |
Coupe 2.0 GT 5E | 85, B2 | 09/1983 - 07/1986 | JS | |
Coupe 2.2 GT | 85, B2 | 09/1984 - 07/1988 | KV | |
Coupe 2.2 GT 5E | 85, B2 | 04/1982 - 07/1984 | KE | |
Coupe 2.2 Quattro | 85, B2 | 12/1984 - 12/1987 | KV, HY | |
Model | Type | Years | Engine | |
Passat 2.0 | 32B | 08/1983 - 03/1988 | HP, JS | |
Passat 2.0 Variant | 32B | 08/1983 - 03/1988 | HP, JS | |
Passat 2.0 Variant Syncro | 32B | 08/1984 - 03/1988 | HP, JS | |
Passat 2.2 | 32B | 01/1985 - 03/1988 | HY, KV | |
Passat 2.2 Variant | 32B | 01/1985 - 03/1988 | HY, KV | |
Passat 2.2 Variant Syncro | 32B | 08/1984 - 03/1988 | HY | |
Passat 2.2i | 32, 33 | 12/1985 - 12/1987 | SG | |
Santana 2.0 | 32 | 08/1983 - 03/1988 | HP, JS |