8 Cylinder
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
450 SLC 5.0 Coupe | R107 | 06/1978 - 02/1980 | M117.960 | |
Model | RB Key | Years | Engine | |
308 GTB Quattrovalvole | FER 19 | 04/1980 - 03/1981 | F106 B 000 | |
308 GTB Quattrovalvole | FER 57 | 07/1981 - 06/1985 | F106 B | |
308 GTB Quattrovalvole | FER 59 | 09/1982 - 06/1985 | F105 A | |
308 GTS Quattrovalvole | FER 150 | 04/1980 - 03/1981 | F106 B 000 | |
308 GTS Quattrovalvole | FER 148 | 07/1981 - 06/1985 | F106 B | |
308 GTS Quattrovalvole | FER 146 | 09/1982 - 06/1985 | F105 A | |
328 GTB | FER 47 | 04/1986 - 12/1988 | F105 C.. | |
328 GTB | FER 28 | 09/1985 - 12/1987 | F105 C.. | |
328 GTB | FER 74 | 01/1988 - 09/1989 | F105 CB.. | |
328 GTS | FER 151 | 04/1986 - 12/1988 | F105 C.. | |
328 GTS | FER 153 | 09/1985 - 12/1987 | F105 C.. | |
328 GTS | FER 154 | 01/1988 - 09/1989 | F105 CB.. | |
Mondail 8 | FER 60 | 07/1981 - 09/1983 | F106 BL | |
Mondail 8 | FER 3 | 05/1980 - 06/1982 | F106 B.. | |
Mondail 8 | FER 73 | 01/1988 - 12/1988 | F105 NS.. | |
Mondail 8 Quattrovalvole | FER 4 | 06/1982 - 06/1985 | F105 A.. | |
Mondail 8 Quattrovalvole | FER 48 | 04/1986 - 12/1987 | F105 C.. | |
Mondail 8 Quattrovalvole | FER 30 | 09/1985 - 12/1987 | F105 C.. |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
450 SEL | W116 | 09/1979 - 04/1980 | M117.986 | |
450 SL Roadster | R107 | 09/1979 - 10/1980 | M117.985 | |
450 SLC Coupe | R107 | 09/1979 - 08/1980 | M117.985 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
380 SE, SEL | W126 | 09/1983 - 08/1985 | M116.961,963 | |
380 SL Roadster | R107 | 07/1980 - 08/1985 | M116.960,962 | |
380 SLC Coupe | R107 | 09/1980 - 08/1981 | M116.960 | |
450 SE | W116 | 09/1974 - 12/1976 | M117.986 | |
450 SEL | W116 | 08/1975 - 08/1980 | M117.986 | |
450 SEL 6.9 | W116 | 09/1976 - 08/1979 | M100.985 | |
450 SL Roadster | R107 | 08/1975 - 08/1980 | M117.985 | |
450 SLC Coupe | R107 | 09/1974 - 08/1979 | M117.985 | |
500 SE, SEL | W126 | 12/1979 - 08/1985 | M117.961,963 | |
500 SL Roadster | R107 | 05/1980 - 12/1985 | M117.960,962 | |
500 SLC Coupe | R107 | 03/1980 - 09/1981 | M117.960 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
450 SLC 5.0 Coupe | R107 | 06/1978 - 02/1980 | M117.960 | |
Model | RB Key | Years | Engine | |
308 GTB Quattrovalvole | FER 19 | 04/1980 - 03/1981 | F106 B 000 | |
308 GTB Quattrovalvole | FER 57 | 07/1981 - 06/1985 | F106 B | |
308 GTB Quattrovalvole | FER 59 | 09/1982 - 06/1985 | F105 A | |
308 GTB Quattrovalvole | FER 150 | 04/1980 - 03/1981 | F106 B 000 | |
308 GTB Quattrovalvole | FER 148 | 07/1981 - 06/1985 | F106 B | |
308 GTB Quattrovalvole | FER 146 | 09/1982 - 06/1985 | F105 A | |
328 GTB | FER 47 | 04/1986 - 12/1988 | F105 C.. | |
328 GTB | FER 28 | 09/1985 - 12/1987 | F105 C.. | |
328 GTB | FER 74 | 01/1988 - 09/1989 | F105 CB.. | |
328 GTB | FER 151 | 04/1986 - 12/1988 | F105 C.. | |
328 GTB | FER 153 | 09/1985 - 12/1987 | F105 C.. | |
328 GTB | FER 154 | 01/1988 - 09/1989 | F105 CB.. | |
Mondail 8 | FER 60 | 07/1981 - 09/1983 | F106 BL | |
Mondail 8 | FER 3 | 05/1980 - 06/1982 | F106 B.. | |
Mondail 8 | FER 73 | 01/1988 - 12/1988 | F105 NS.. | |
Mondail 8 Quattrovalvole | FER 4 | 06/1982 - 06/1985 | F105 A.. | |
Mondail 8 Quattrovalvole | FER 48 | 04/1986 - 12/1987 | F105 C.. | |
Mondail 8 Quattrovalvole | FER 30 | 09/1985 - 12/1987 | F105 C.. |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
380 SE, SEL | W126 | 09/1983 - 08/1985 | M116.961,963 | |
500 SE, SEL | W126 | 12/1979 - 08/1985 | M117.961,963 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB key | Years | Engine | |
Corniche 6.8 Coupe | BEY 2 | 02/1980 - 12/1980 | ||
T 2-Serie | BEY 4 | 02/1980 - 12/1980 | ||
Model | RB key | Years | Engine | |
Camargue | ROL 4 | 02/1980 - 12/1980 | OHV V8 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
450 SEL | W116 | 09/1979 - 04/1980 | M117.986 (USA) | |
450 SL Roadster | R107 | 09/1979 - 10/1980 | M117.986 (USA) | |
450 SLC Roadster | R107 | 09/1979 - 08/1980 | M117.986 (USA) |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
380 SE, SEL | W126 | 09/1983 - 08/1985 | M116.961,963 | |
380 SEC | W126 | 11/1981 - 08/1983 | M116.963 | |
380 SEL | W126 | 10/1980 - 08/1983 | M116.961,963 (CDN, USA) | |
380 SL Roadster | R107 | 09/1980 - 08/1985 | M116.960,962 (CDN, USA) | |
380 SLC Coupe | R107 | 09/1980 - 08/1981 | M116.960 | |
500 SEC | W126 | 09/1983 - 08/1985 | M117.963 | |
500 SEL | W126 | 09/1983 - 07/1985 | M117.963 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
380 SEC | W126 | 11/1981 - 08/1983 | M116.963 | |
380 SEL | W126 | 10/1980 - 08/1983 | M116.961,963 (CDN, USA) | |
380 SL Roadster | R107 | 09/1980 - 08/1985 | M116.960,962 (CDN, USA) | |
380 SLC Coupe | R107 | 09/1980 - 08/1981 | M116.960 | |
500 SEC | W126 | 09/1983 - 08/1985 | M117.963 | |
500 SEL | W126 | 09/1983 - 07/1985 | M117.963 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
380 SE, SEL | W126 | 09/1983 - 08/1985 | M116.961,963 | |
380 SL Roadster | R107 | 07/1980 - 08/1985 | M116.960,962 | |
380 SLC Coupe | R107 | 09/1980 - 08/1981 | M116.960 | |
450 SE | W116 | 09/1974 - 12/1976 | M117.986 | |
450 SEL | W116 | 08/1975 - 08/1980 | M117.986 | |
450 SEL 6.9 | W116 | 09/1976 - 08/1979 | M100.985 | |
450 SL Roadster | R107 | 08/1975 - 08/1980 | M117.985 | |
450 SLC Coupe | R107 | 09/1974 - 08/1979 | M117.985 | |
500 SE, SEL | W126 | 12/1979 - 08/1985 | M117.961,963 | |
500 SL Roadster | R107 | 05/1980 - 12/1985 | M117.960,962 | |
500 SLC Coupe | R107 | 03/1980 - 09/1981 | M117.960 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB key | Years | Engine | |
Corniche 6.8 Coupe | BEY 1 | 01/1981 - 06/1984 | ||
Mulsanne 6.8 | BEY 3 | 01/1981 - 12/1986 | V8 | |
Model | RB key | Years | Engine | |
Camargue | ROL 3 | 01/1981 - 06/1985 | OHV V8 | |
Corniche | ROL 38 | 01/1987 - 05/1990 | OHV V8 Kat | |
Silver Spirit | ROL 33 | 01/1987 - 07/1989 | OHV V8 | |
Silver Spirit | ROL 32 | 10/1980 - 12/1986 | OHV V8 (CDN, J, USA) | |
Silver Spur | ROL 30 | 01/1987 - 07/1989 | OHV V8 | |
Silver Spur | ROL 29 | 10/1980 - 12/1986 | OHV V8 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB Key | Years | Engine | |
208 GTB Turbo | FER 18 | 06/1982 - 10/1989 | F106 D.. | |
208 GTB Turbo | FER 43 | 04/1986 - 10/1990 | F106 N.. | |
208 Turbo GTS | FER 145 | 04/1986 - 10/1990 | F106 N.. | |
Model | Chassis | Years | Engine | |
380 SE, SEL | W126 | 09/1983 - 08/1985 | M116.961,963 | |
380 SEC | W126 | 10/1981 - 07/1985 | M116.963 | |
380 SL Roadster | R107 | 07/1980 - 08/1985 | M116.960,962 | |
500 SE, SEL | W126 | 12/1979 - 08/1985 | M117.961,963 | |
500 SEC | W126 | 10/1981 - 08/1985 | M117.963 | |
500 SL Roadster | R107 | 05/1980 - 12/1985 | M117.960,962 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Chassis | Years | Engine | |
380 SE, SEL | W126 | 09/1983 - 08/1985 | M116.961,963 | |
380 SEC | W126 | 10/1981 - 07/1985 | M116.963 | |
380 SL Roadster | R107 | 07/1980 - 08/1985 | M116.960,962 | |
500 SE, SEL | W126 | 12/1979 - 08/1985 | M117.961,963 | |
500 SEC | W126 | 10/1981 - 08/1985 | M117.963 | |
500 SL Roadster | R107 | 05/1980 - 12/1985 | M117.960,962 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Type | RB Key | Years | Engine | |
911 3.3 Turbo | POR 43 | 08/1985 - 08/1989 | 930.68 | |
911 3.3 Turbo | POR 75, 100 | 12/1990 - 08/1992 | M30.69 | |
911 3.6 Turbo | POR 79, 97 | 12/1993 - 08/1993 | M64.50 |
Repair Kit for a Eight Cylinder Alloy Bosch K-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance
- Eight O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance)
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- Eight O-ring for flow adjustable screws. (At top of the fuel distributor)
- One O-ring for pushup valve and one for primary-pressure regulator.
- One O-ring for pushup valve of the secondary-pressure regulator . (At top of the fuel distributor).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Type | RB Key | Years | Engine | |
Corniche II 6.7 | ROL 37 | 01/1986 - 03/1989 | OHV V8 | |
Silver Spirit | ROL 34 | 03/1986 - 03/1989 | OHV V8 | |
Silver Spur | ROL 35 | 03/1986 - 05/1990 | OHV V8 |
- 1