6 Cylinder
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
4000 2.2 5E | 81 | 08/1980 - 07/1984 | WE | |
Coupe 2.2 5E | 85, B2 | 09/1982 - 08/1984 | KL |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.2 | 44, 44Q, C3 | 08/1982 - 07/1984 | WU | |
100 2.2 Avant | 44, 44Q, C3 | 05/1983 - 07/1984 | WU | |
4000 2.2 5E | 81 | 01/1980 - 11/1983 | WE | |
5000 2.2 | 44 | 06/1983 - 07/1984 | WU | |
80 2.0 | 81, 85, B2 | 08/1983 - 07/1984 | JL | |
90 2.0 | 81, 85, B2 | 10/1984 - 03/1987 | JL | |
Coupe 2.0 GT 5E | 85, B2 | 09/1983 - 07/1988 | JL | |
Coupe 2.2 GT 5E | 85, B2 | 07/1981 - 12/1983 | WE | |
Model | RB Key | Years | Engine | |
Santana 2.0i | NIS 63 | 01/1984 - 01/1987 | ||
Model | RB Key | Years | Engine | |
Quantum 2.2 | VWW 196 | 08/1983 - 07/1984 | KM | |
Quantum 2.2 Station Wagon | VWW 3790 | 08/1983 - 07/1984 | KM |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
Sierra 2.8i Turnier 4x4 | 87 | 01/1987 - 12/1988 | PPG | |
Sierra 2.8i XR 4x4 | 87 | 01/1987 - 12/1988 | PPG | |
Sierra 2.8i XR4 | 82 | 08/1982 - 02/1985 | PRT | |
Sierra 2.8i XR4 4x4 | 82 | 02/1985 - 12/1986 | PRT | |
Sierra 2.8i XR4 Turnier | 82 | 08/1982 - 02/1985 | PRT | |
Sierra 2.8i XR4 Turnier 4x4 | 82 | 03/1985 - 12/1986 | PRT |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
200 2.2 | 44, C3 | 08/1984 - 07/1985 | KU | |
200 2.2 Avant quattro Turbo | 44, C3 | 11/1984 - 01/1987 | JY | |
200 2.2 Avant quattro Turbo | 44, C3 | 11/1984 - 12/1987 | KG | |
200 2.2 Turbo | 44, C3 | 03/1983 - 09/1986 | JY | |
200 2.2 Turbo | 44, C3 | 08/1983 - 01/1988 | KG | |
200 2.2 Quattro Turbo | 44, C3 | 11/1984 - 01/1987 | JY | |
200 2.2 Quattro Turbo | 44, C3 | 11/1984 - 12/1987 | KG |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
200 2.2 | 44, C3 | 08/1984 - 07/1985 | KU | |
200 2.2 Avant quattro Turbo | 44, C3 | 11/1984 - 01/1987 | JY | |
200 2.2 Avant quattro Turbo | 44, C3 | 11/1984 - 12/1987 | KG | |
200 2.2 Turbo | 44, C3 | 03/1983 - 09/1986 | JY | |
200 2.2 Turbo | 44, C3 | 08/1983 - 01/1988 | KG | |
200 2.2 Quattro Turbo | 44, C3 | 11/1984 - 01/1987 | JY | |
200 2.2 Quattro Turbo | 44, C3 | 11/1984 - 12/1987 | KG |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
Thema 6V PRV | 104 | 11/1984 - 09/1988 | 834 E 000 | |
Model | RB Key | Years | Engine | |
760 2.8i | VOL 202 | 02/1982 - 04/1986 | B28E |
Repair kit for a five cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
200 2.2 Avant quattro Turbo | 44, C3 | 11/1984 - 01/1987 | JY | |
200 2.2 Avant quattro Turbo | 44, C3 | 11/1984 - 12/1987 | KG | |
200 2.2 Turbo | 44, C3 | 08/1983 - 09/1986 | JY | |
200 2.2 Turbo | 44, C3 | 08/1983 - 01/1988 | KG | |
200 2.2 Quattro Turbo | 44, C3 | 11/1984 - 01/1987 | JY | |
200 2.2 Quattro Turbo | 44, C3 | 11/1984 - 12/1987 | KG |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.2 Avant quattro Turbo | 44, 44Q, C3 | 03/1986 - 11/1990 | MC | |
100 2.2 Turbo | 44, 44Q, C3 | 05/1986 - 12/1990 | MC | |
100 2.2 Turbo Avant | 44, 44Q, C3 | 08/1988 - 07/1989 | MC | |
100 2.2 Quattro Turbo | 44, 44Q, C3 | 03/1986 - 11/1990 | MC | |
200 2.2 Avant quattro Turbo | 44, C3 | 01/1985 - 11/1990 | MC | |
200 2.2 Turbo | 44, C3 | 08/1985 - 12/1991 | MC | |
200 2.2 Quattro Turbo | 44, C3 | 01/1985 - 12/1990 | MC | |
5000 2.2 Turbo | 44 | 08/1985 - 05/1988 | MC | |
5000 2.2 Turbo quattro | 44 | 01/1985 - 02/1988 | MC |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB Key | Years | Engine | |
25 2.9i | REN 799 | 10/1986 - 06/1987 | Z7W 702 |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | RB Key | Years | Engine | |
25 2.7i | REN 809 | 01/1984 - 08/1989 | Z7V 708 | |
25 2.7i | REN 821 | 01/1984 - 08/1989 | Z7V 709 | |
25 2.7i | REN 822 | 01/1984 - 08/1989 | Z7V 711 |
Repair kit for a five cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.0 | 44, 44Q, C3 | 08/1986 - 12/1987 | SL | |
100 2.0 | 44, 44Q, C3 | 08/1984 - 12/1987 | KP | |
100 2.0 | 44, 44Q, C3 | 01/1988 - 12/1990 | RT | |
100 2.0 Avant | 44, 44Q, C3 | 08/1986 - 12/1987 | SL | |
100 2.0 Avant | 44, 44Q, C3 | 08/1984 - 12/1987 | KP | |
100 2.0 Avant | 44, 44Q, C3 | 01/1988 - 12/1990 | RT | |
100 2.2 | 44, 44Q, C3 | 08/1984 - 12/1988 | HX | |
100 2.2 | 44, 44Q, C3 | 09/1984 - 12/1990 | KU | |
100 2.2 Avant | 44, 44Q, C3 | 09/1986 - 12/1987 | HX | |
100 2.2 Avant | 44, 44Q, C3 | 01/1988 - 07/1989 | KU | |
100 2.2 Avant quattro | 44, 44Q, C3 | 08/1984 - 12/1987 | HX | |
100 2.2 Avant quattro | 44, 44Q, C3 | 08/1986 - 11/1990 | KU | |
100 2.2 quattro | 44, 44Q, C3 | 08/1984 - 12/1987 | HX | |
100 2.2 quattro | 44, 44Q, C3 | 08/1986 - 11/1990 | KU | |
100 2.2 E | 4A2, C4 | 01/1992 - 12/1998 | PR | |
90 2.0 | 81, 85, B2 | 02/1986 - 03/1987 | SK | |
90 2.0 | 81, 85, B2 | 10/1984 - 03/1987 | HP | |
90 2.0 | 81, 85, B2 | 10/1984 - 03/1987 | JS | |
90 2.0 | 89, 8A2, B3 | 05/1987 - 12/1991 | PS | |
90 2.2 | 81, 85, B2 | 10/1984 - 03/1987 | KV | |
90 2.2 | 81, 85, B2 | 10/1984 - 03/1987 | HY | |
90 2.2 E | 89, 8A2, B3 | 04/1987 - 12/1991 | KV | |
90 2.2 quattro | 81, 85, B2 | 08/1984 - 03/1987 | HY | |
90 2.2 quattro | 89, 8A2, B3 | 04/1987 - 09/1991 | KV | |
Coupe 2.0 GT | 85, B2 | 08/1983 - 07/1986 | HP | |
Coupe 2.0 GT 5E | 85, B2 | 09/1983 - 07/1986 | JS | |
Coupe 2.2 | 89, B3 | 11/1988 - 07/1991 | KV | |
Coupe 2.2 GT | 85, B2 | 09/1984 - 07/1988 | KV | |
Coupe 2.2 GT | 85, B2 | 09/1984 - 07/1988 | HY | |
Coupe 2.2 quattro | 85, B2 | 12/1984 - 12/1987 | KV | |
Coupe 2.2 quattro | 85, B2 | 12/1984 - 12/1987 | HY | |
Coupe 2.2 quattro | 89, B3 | 11/1988 - 07/1991 | KV | |
Model | Type | Years | Engine | |
Passat 2.0 | 32B | 08/1983 - 07/1987 | HP | |
Passat 2.0 | 32B | 08/1983 - 03/1988 | JS | |
Passat 2.0 Variant | 32B | 08/1983 - 07/1987 | HP | |
Passat 2.0 | 32B | 08/1983 - 03/1988 | JS | |
Passat 2.0 Syncro | 32B | 08/1985 - 03/1988 | HP | |
Passat 2.2 | 32B | 01/1985 - 03/1988 | HY | |
Passat 2.2 | 32B | 01/1985 - 03/1988 | KV | |
Passat 2.2 Variant | 32B | 01/1985 - 03/1988 | HY | |
Passat 2.2 | 32B | 01/1985 - 03/1988 | KV | |
Passat 2.2 Syncro | 32B | 08/1984 - 03/1988 | HY | |
Santana 2.0 | 32 | 06/1985 - 03/1988 | JS | |
Replacement number: 0438100146, 0-986-438-146 Exchange number: F 026 TX2 010 |
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.2 Avant quattro Turbo | 44, 44Q, C3 | 03/1986 - 11/1990 | MC | |
100 2.2 Turbo | 44, 44Q, C3 | 05/1986 - 12/1990 | MC | |
100 2.2 Turbo Avant | 44, 44Q, C3 | 08/1988 - 07/1989 | MC | |
100 2.2 Quattro Turbo | 44, 44Q, C3 | 03/1986 - 11/1990 | MC | |
200 2.2 Avant quattro Turbo | 44, C3 | 01/1985 - 11/1990 | MC, 1B | |
200 2.2 Turbo | 44, C3 | 08/1985 - 12/1991 | MC, 1B, 2B | |
200 2.2 Quattro Turbo | 44, C3 | 01/1985 - 12/1990 | MC, 1B | |
500 2.2 i Turbo | C3 | 01/1989 - 03/1992 | MC | |
Quattro 2.3 Turbo | 85, B2 | 08/1987 - 07/1989 | MB |