Audi
Repair kit for a six cylinder Cast Iron (adjustable) Bosch K-Jetronic Fuel Distributor
The kit contains:
- One stainless steel diaphragm made with advanced technology
- Six O-rings for metering slot body (Viton o-rings have much higher temperature and chemical resistance)
- Two O-rings for pushup valve (two different sizes depending on the type of the valve) and one for primary-pressure regulator.
- Two O-rings for control piston (Viton)
- One O-ring for control plunger inside fuel distributor (Viton)
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Six O-rings for flow adjustable screws. (At top of the fuel distributor)
- One shaped O-ring for screw plug (control piston - some fuel distributors are equipped with). OEM
- Set (30 pcs) of copper seal rings for screws and connection ports.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.2 Avant quattro Turbo | 44, 44Q, C3 | 03/1986 - 11/1990 | MC | |
100 2.2 Turbo | 44, 44Q, C3 | 05/1986 - 12/1990 | MC | |
100 2.2 Turbo Avant | 44, 44Q, C3 | 08/1988 - 07/1989 | MC | |
100 2.2 Quattro Turbo | 44, 44Q, C3 | 03/1986 - 11/1990 | MC | |
200 2.2 Avant quattro Turbo | 44, C3 | 01/1985 - 11/1990 | MC, 1B | |
200 2.2 Turbo | 44, C3 | 08/1985 - 12/1991 | MC, 1B, 2B | |
200 2.2 Quattro Turbo | 44, C3 | 01/1985 - 12/1990 | MC, 1B | |
500 2.2 i Turbo | C3 | 01/1989 - 03/1992 | MC | |
Quattro 2.3 Turbo | 85, B2 | 08/1987 - 07/1989 | MB |
Repair Kit for a Four Cylinder Alloy Bosch KE-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance.
- Four O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance).
- One shaped O-ring for screw plug (control piston). OEM.
- Two O-rings for connection between fuel distributor and electrohydraulic actuator. OEM.
- One O-ring for control piston (Viton).
- One O-ring for control plunger inside fuel distributor (Viton).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
- One O-ring (Viton) for adjusting screw and One (Aluminum) seal ring for cover screw of EHA.
- One brand new retainer shim.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 1.8 | 44, 44Q, C3 | 04/1985 - 12/1990 | PH | |
100 1.8 Avant | 44, 44Q, C3 | 08/1986 - 12/1987 | PH | |
100 1.8 Avant quattro | 44, 44Q, C3 | 08/1985 - 07/1988 | PH | |
4000 1.8 | 81 | 11/1983 - 07/1984 | JN | |
4000 1.8 | 81 | 10/1984 - 12/1987 | MG | |
80 1.8 | 81, 85, B2 | 08/1983 - 03/1987 | JN | |
80 1.8 | 81, 85, B2 | 08/1985 - 03/1987 | PV | |
80 1.8 S | 89, 8A2, B3 | 09/1986 - 12/1991 | JN | |
80 1.8 Quattro | 81, 85, B2 | 08/1985 - 08/1986 | JN | |
80 1.8 Quattro | 81, 85, B2 | 03/1985 - 08/1986 | PV | |
80 1.8 Quattro | 89, 8A2, B3 | 09/1986 - 07/1990 | JN | |
80 1.9 E | 89, 8A2, B3 | 09/1987 - 07/1988 | SD | |
80 1.9 Quattro | 89, 8A2, B3 | 09/1986 - 07/1988 | SD | |
90 1.8 | 81, 85, B2 | 06/1984 - 03/1987 | JN | |
Coupe 1.8 GT | 85, B2 | 01/1985 - 07/1988 | JN | |
Coupe 1.8 GT | 85, B2 | 08/1986 - 07/1988 | PV | |
Model | Type | Years | Engine | |
Toledo 1.8 | 1L2 | 05/1991 - 03/1994 | PL | |
Model | Type | Years | Engine | |
Fox 1.8 | 02/1987 - 12/1997 | UM | ||
Fox 1.8 | 03/1987 - 12/1997 | JN | ||
Fox 1.8 Station Wagon | 09/1986 - 08/1990 | JN | ||
Fox 1.8 Station Wagon | 09/1986 - 08/1987 | UM | ||
Golf 1.8 Station Wagon | 19 | 11/1984 - 12/1986 | HT, RD | |
Golf 1.8 16V | 1G1 | 12/1988 - 07/1989 | PL | |
Golf II 1.8 | 19, 1G | 01/1984 - 08/1988 | GX | |
Golf II 1.8 | 19, 1G | 01/1985 - 08/1985 | HT | |
Golf II 1.8 | 19, 1G | 08/1985 - 10/1987 | RD | |
Golf II 1.8 | 19, 1G | 02/1986 - 10/1991 | PL | |
Golf II 1.8 Syncro | 19, 1G1, 1G4 | 02/1986 - 07/1988 | GX | |
Jetta 1.8 | 1G2 | 01/1985 - 08/1985 | HT | |
Jetta 1.8 | 1G2, 19E | 08/1984 - 10/1987 | GX | |
Jetta 1.8 | 1G2, 19E | 08/1985 - 08/1988 | RD | |
Jetta 1.8 16V | 1G2, 19E | 08/1986 - 10/1991 | PL | |
Jetta 1.8 Syncro | 1G2, 19E | 08/1987 - 07/1988 | GX | |
Passat 1.8 | 32B | 08/1983 - 03/1988 | JN | |
Passat 1.8 Variant | 32B | 08/1983 - 03/1988 | JN | |
Passat 1.8 Variant Syncro | 32B | 01/1986 - 03/1988 | JN | |
Quantum 1.8 | 09/1983 - 08/1985 | JN | ||
Quantum 1.8 Station Wagon | 08/1983 - 08/1985 | JN | ||
Santana 1.8 | 32 | 08/1984 - 12/1984 | JN | |
Santana 1.8 16V | 52B | 02/1986 - 07/1992 | PL | |
Scirocco 1.8 16V | 53B | 02/1986 - 07/1992 | PL |
Repair Kit for a Six Cylinder Alloy Bosch KE-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance.
- Six O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance).
- One shaped O-ring for screw plug (control piston). OEM.
- Two O-rings for connection between fuel distributor and electrohydraulic actuator. OEM.
- One O-ring for control piston (Viton).
- One O-ring for control plunger inside fuel distributor (Viton).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (12 pcs) of Copper and Aluminum seal rings for screws and connection ports.
- One O-ring (Viton) for adjusting screw and One (Aluminum) seal ring for cover screw of EHA.
- One brand new retainer shim.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.3 | 44, 44Q, C3 | 10/1986 - 12/1990 | NF | |
100 2.3 | 4A2, C4 | 12/1990 - 07/1994 | AAR | |
100 2.3 Avant | 44, 44Q, C3 | 10/1986 - 12/1990 | NF | |
100 2.3 Avant | 4A2, C4 | 12/1990 - 07/1994 | AAR | |
100 2.3 Avant Quattro | 44, 44Q, C3 | 10/1986 - 12/1990 | NF | |
100 2.3 Avant Quattro | 4A2, C4 | 12/1990 - 07/1994 | AAR | |
100 2.3 Quattro | 44, 44Q, C3 | 8/1986 - 08/1991 | NF | |
100 2.3 Quattro | 4A2, C4 | 12/1990 - 07/1994 | AAR | |
5000 2.3 | 44 | 10/1986 - 01/1988 | NF | |
5000 2.3 Quattro | 44 | 04/1987 - 02/1988 | NF | |
80 2.3 | 8C2, B4 | 09/1991 - 11/1994 | NG | |
80 2.3 Avant Quattro | 8C5, B4 | 08/1992 - 11/1994 | NG | |
80 2.3 E Avant | 8C5, B4 | 08/1992 - 11/1994 | NG | |
80 2.3 Quattro | 89, 8A2, B3 | 04/1987 - 08/1991 | NG | |
80 2.3 Quattro | 8C2, B4 | 09/1991 - 11/1994 | NG | |
90 2.3 E | 89, 8A2, B3 | 04/1987 - 12/1991 | NG | |
90 Quattro | 89, 8A2, B3 | 04/1987 - 09/1991 | NG | |
A6 2.3 | 4A2, C4 | 06/1994 - 10/1997 | AAR | |
A6 2.3 Avant | 4A2, C4 | 06/1994 - 06/1996 | AAR | |
A6 2.3 Avant Quattro | 4A2, C4 | 07/1996 - 07/1997 | AAR | |
A6 2.3 Quattro | 4A2, C4 | 08/1994 - 07/1995 | AAR | |
Cabriolet 2.3 Quattro | 8G7, B4 | 06/1991 - 07/1994 | NG | |
Coupe 2.3 | 89, B3 | 11/1988 - 07/1994 | NG | |
Coupe 2.3 GT | 85, B2 | 08/1986 - 07/1988 | NG | |
Coupe 2.3 Quattro | 85, B2 | 01/1987 - 12/1987 | NG | |
Coupe 2.3 Quattro | 89, B3 | 11/1988 - 07/1994 | NG |
Repair Kit for a Four Cylinder Alloy Bosch KE-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance.
- Four O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance).
- One shaped O-ring for screw plug (control piston). OEM.
- Two O-rings for connection between fuel distributor and electrohydraulic actuator. OEM.
- One O-ring for control piston (Viton).
- One O-ring for control plunger inside fuel distributor (Viton).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (17 pcs) of Copper and Aluminum seal rings for screws and connection ports.
- One O-ring (Viton) for adjusting screw and One (Aluminum) seal ring for cover screw of EHA.
- One brand new retainer shim.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.0 | 4A2, C4 | 01/1991 - 12/1992 | AAD | |
100 2.0 Avant | 4A5, C4 | 08/1991 - 12/1992 | AAD | |
100 2.0 Avant Quattro | 4A5, C4 | 12/1990 - 07/1992 | AAD | |
100 2.0 Quattro | 4A2, C4 | 12/1990 - 07/1992 | AAD | |
80 2.0 | 89, 8A2, B3 | 08/1990 - 12/1991 | AAD | |
80 2.0 E | 89, 8A2, B3 | 08/1988 - 10/1990 | 3A | |
80 2.0 Quattro | 89, 8A2, B3 | 08/1988 - 09/1990 | 3A | |
80 2.0 Quattro | 89, 8A2, B3 | 09/1990 - 09/1991 | AAD | |
90 2.0 | 89, 8A2, B3 | 09/1987 - 10/1990 | 3A | |
Coupe 2.0 | 89, B3 | 05/1989 - 07/1990 | 3A | |
Coupe 2.0 | 89, B3 | 08/1990 - 07/1991 | AAD |
Repair Kit for a Six Cylinder Alloy Bosch KE-Jetronic Fuel Distributor
The kit contains:
- One diaphragm made with advanced technology; the material has a much higher temperature and chemical resistance.
- Six O-rings for metering slot body (Viton o-rings also have much higher temperature and chemical resistance).
- One shaped O-ring for screw plug (control piston). OEM.
- Two O-rings for connection between fuel distributor and electrohydraulic actuator. OEM.
- One O-ring for control piston (Viton).
- One O-ring for control plunger inside fuel distributor (Viton).
- One O-ring for connection between fuel distributor and Air Flow Meter. OEM.
- Set (12 pcs) of Copper and Aluminum seal rings for screws and connection ports.
- One O-ring (Viton) for adjusting screw and One (Aluminum) seal ring for cover screw of EHA.
- One brand new retainer shim.
Brand New.
Made in USA.
This repair kit is suitable for the following Bosch Fuel distributors numbers:
Model | Type | Years | Engine | |
100 2.0 | 44, 44Q, C3 | 01/1988 - 12/1990 | RT | |
100 2.0 Avant | 44, 44Q, C3 | 01/1988 - 12/1990 | RT | |
90 2.0 | 89, 8A2, B3 | 05/1987 - 12/1991 | PS |